BMB-EA127

Wellness Blood Glucose Meter

No Coding Required Series Blood Glucose Meter is designed as a total healthcare solution. It is easy to operate and to carry on-the-go to get on with your daily life. Large LCD screen, simple interface, and automatic strip type detection make this product ideally designed for healthcare needs for a variety of users.

Features

-	No coding
-	Accuracy & Precision
-	Small sample size 0.3μL
-	400 Memories
-	Before/After Meals
-	6 Daily Alarms Reminders
-	Large LCD Display
-	Result in 5 seconds
-	Test function: Blood Glucose

Get A Quote

How To Use

For safety and to prevent cross-contamination, always place the protective cover back on before discarding the used lancets.
To avoid injury, do not leave a used lancet in the puncturer. Always remove used lancets immediately after a test

The Wellness No Coding Required Series Blood Glucose Meter is designed as a total healthcare solution. It is easy to operate and to carry on-the-go to get on with your daily life. large LCD screen, simple interface, and automatic strip type detection make this product ideally designed for healthcare needs for a variety of users.

Additional information

Test Function	Blood Glucose
Measuring Range	20 ~ 600 mg/dL (1.1 ~ 33.3 mmol/L)
Calibration	Plasma qruivalent
Test Time	5 seconds
Memory Capacity	400 test results
Operation Temperature/ Humidity	50 - 104 °F (10 - 40 °C), 15 ~ 85 % humidity
Storage Temperature/ Humidity	39.2 - 104 °F (4 - 40 °C), 15 ~ 85 % humidity
Sample Volume	> 0.3 μl
Resolution	1 mg/dL (0.1 mmol/L)
Sample Type	Capillary whole blood and venous blood
Hematocrit Range	30 - 55 %
Power Supply	Two CR2032 Batteries (3V)
Battery Life	More than 1000 times
Dimensions	82 x 57 x 17.6 mm
Weight	52.5 grams (without battery)
Display	LCD display (45 x 30 mm)
Daily Alarm Function	6 sets
Test Principle	Amperometric method
Analysis Method	Electrochemical

1.	BMB-EA127 Blood Glucose Meter
2.	Puncturer (Lancing Device)
3.	Lancets
4.	Test Strips
5.	Battery
6.	Zipped pouch
7.	User's Manual
8.	Warranty Card

For safety and to prevent cross-contamination, always place the protective cover back on before discarding the used lancets. To avoid injury, do not leave a used lancet in the puncturer. Always remove used lancets immediately after a test

1.	Unscrew the puncturer’s adjustable tip.
2.	Insert a lancet into the carrier.
3.	Twist off the protective cover to expose the lancet tip.
4.	Replace the adjustable tip tightly.
5.	Choose a desired skin penetration depth by rotating the top portion of the adjustable tip until the appropriate setting number lines up with the arrow. Settings are based on skin type: - Depth 1~2 for soft or thin skin - Depth 3 for average skin - Depth 4~5 for thick or calloused skin
6.	Hold the tip of the puncturer with one hand and pull the sliding mechanism back with the other. When you hear a click, the trigger rises up.
7.	Release the sliding mechanism. The puncturer is now ready to obtain a blood sample.

Our BMB-EA127 Blood Glucose Meter offer a limited one (1) year warranty.

This warranty does not extend to failures resulting from accident, misuse, abuse, alteration, use of unauthorized service, parts or cleaning solutions, or failure to comply with Instruction Manual.